Filter
Top Products
1
1-21 Setting up PostScript or PCL printing with Windows 98/Me
ES3640e MFP EFI User’s Software Installation Guide - 21
The Two-Way Communication feature also updates Expert Color
Settings options to reflect the current Color settings on the Fiery.
To access the Expert Color Settings options, click the Expert
Settings tab in the ColorWise print option bar of the Fiery printing
tab of your PS printer driver. For more information, see Chapter 1
of the Color Guide.
To configure installed options and update print
options settings automatically for
Windows 98/Me
1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-
Way Communication.
2. Type the ES3640e MFP’s IP address or DNS name.
3. In the PS driver, to display the ES3640e MFP’s current default settings
when opened, select Update Fiery Driver When Opened.
4. Click Update.
5. In the PS driver, to receive an e-mail notification after your job has been
printed, select Enable E-mail Notification, and type in the e-mail address
to which notification should be sent.
You will also receive e-mail notification of any errors that occur
during printing.
Note:Enable E-mail Notification is displayed only if Email Service
is enabled at Setup.
6. Click OK.
Completing the Windows 98/Me printer
connection
To print from Windows 98/Me, you should already have set up
network servers, if any, and set up the Fiery to accept print jobs
from your computer.
To complete the Windows 98/Me connection, you must configure a
connection on each Windows computer for the network.