Filter
Top Products
1
1-49 Setting up PostScript or PCL printing with Windows
ES3640e MFP EFI User’s Software Installation Guide - 49
6. Click OK.
Completing the Windows 2000/XP/Server 2003
printer connection
To print from Windows 2000/XP/Server 2003, you must:
• Set up network servers, if any.
• Set up the Fiery to accept print jobs from your computer.
• Configure a port on each Windows 2000/XP/Server 2003
computer for the network type.
Note:The procedures for completing the printer connection for
Windows 2000/XP and Windows Server 2003 are similar.
Windows 2000 illustrations are used in the following procedure,
with relevant Windows XP differences noted.
To do this See
Configure the parallel
connection
“Completing the Windows
2000/XP/Server 2003 parallel port
connection” in this section.
Configure the TCP/IP (LPR port)
connection
“Completing the Windows
2000/XP/Server 2003 TCP/IP and
Port 9100 or LPR connection” on
page 1-51.
Configure the IPX (Novell)
connection
“Completing the Windows
2000/XP/Server 2003 IPX (Novell)
connection” on page 1-52.