Filter
Top Products
1
1-37 Setting up PostScript or PCL printing with Windows NT 4.0
ES3640e MFP EFI User’s Software Installation Guide - 37
driver with the Two-Way Communication feature, you allow the
ES3640e MFP to complete the actual setting.
The Two-Way Communication feature also updates Expert Color
Settings options to reflect the current Color settings on the Fiery.
To access Expert Color Settings options, click the Expert Settings
tab in the ColorWise print option bar of the Fiery printing tab of
your printer driver. For more information, see Chapter 1 of the
Color Guide.
To set up Two-Way Communication in the printer
driver for Windows NT 4.0
1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-
Way Communication.
2. Type the ES3640e MFP’s IP address or DNS name.
3. In the PS driver, to display the ES3640e MFP’s current default settings
when opened, select Update Fiery Driver When Opened.
4. Click Update.
5. In the PS driver, to receive an e-mail notification after your job has been
printed, select Enable E-mail Notification, and type in the e-mail address
to which notification should be sent.
You will also receive e-mail notification of any errors that occur
during printing.
Note:Enable E-mail Notification is displayed only if Email Service
is enabled at Setup.
6. Click OK.
Completing the Windows NT 4.0 printer
connection
To print from Windows NT 4.0, you must:
• Set up network servers, if any.
• Set up the Fiery to accept print jobs from your computer.