Filter
Top Products
2
2-87 Installing Fiery software and fonts
ES3640e MFP EFI User’s Software Installation Guide - 87
Configuring a connection for Fiery Spooler
Before you begin, print a Configuration page from the Printer
Control Panel and note the IP address of the ES3640e MFP. See
page 2-84.
To configure the connection for Fiery Spooler
1. Start the utility by double-clicking its icon.
The Chooser dialog box appears.
2. Click Option.
3. Click Add.
4. Enter the appropriate information for the ES3640e MFP.
Name
—Enter the IP address (or DNS name) of the ES3640e MFP.
New Device—Enter the name of the device that the Fiery is
installed in:
ES3640e MFP. This device name appears in the Printer
Setup section of the Configuration page.
Note:Type ES3640e MFP exactly as shown because the device
name is case-sensitive.
5. When you have entered all the information, click Add.
6. With the device name selected, click OK.
The ES3640e MFP appears in a list of configured servers.
7. Click OK in the Configure dialog box.
The ES3640e MFP appears in a list of available servers.
Fiery name and device
name (ES3640e MFP)