Filter
Top Products
1
1-23 Setting up PostScript or PCL printing with Windows 98/Me
ES3640e MFP EFI User’s Software Installation Guide - 23
Note:
Check this selection carefully. It may read LPT 1: (Printer
Port), which is not equivalent to LPT 1: (ECP Printer Port).
If this box does not read LPT 1: (ECP Printer Port), change the
port setting now, as described in “To prepare the port for parallel
port printing” on page 1-24, and then return to this procedure.
You may need your Windows System CD.
4. If you changed the selection in the “Print to the following port” menu,
click Apply.
A Warning dialog box may appear, stating that fonts you
downloaded to the previously selected port may be lost; click OK.
5. Click Spool Settings.
6. Select either “Spool print jobs so program finishes printing faster” or
“Print directly to the printer.”
The selection you make depends on the port timeout you set in
step 3 on page 1-22:
• If you set the Port Timeout in Seconds to 10, you can select
either option; however, spooling is faster.
• If you set the Port Timeout in Seconds to 5, select “Print directly
to the printer.”
7. Select “Disable bi-directional support for this printer” and click OK.
8. Click Apply.
You are now ready to print from your applications to the Fiery with
the parallel port. To confirm the connection, print a Test page.