Filter
Top Products
1
1-32 Installing User Software on a Windows Computer
ES3640e MFP EFI User’s Software Installation Guide - 32
Setting up IPP printing with Windows 98/Me
With Internet Printing Protocol (IPP), print jobs are sent to the
Fiery over the Internet.
IPP printing is supported on Windows 2000/XP but can be enabled
on Windows 98/Me computers by installing the wpnpins.exe client
file (available on the Windows Me CD or the Windows 2000 Server
CD). For more information about obtaining and installing this
client, contact Microsoft Technical Support.
Note:The IPP setup procedures are performed after installing the
appropriate printer drivers. See “To install the PostScript or PCL
printer driver for Windows 98/Me” on page 1-17.
Before you begin
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing.
For more information, see the Configuration Guide.
3. Specify the printing destination on your computer.
To set up IPP printing with Windows 98/Me
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers windows, right-click the icon for the Fiery PostScript
printer driver and choose Properties.
3. Click the Details tab and click Add Port.
The Add Port dialog box appears.
4. Enter the network path for the printer.
5. Click OK.
Setting up PostScript or PCL printing with