Filter
Top Products
108
Using Socket Service Functions Section 6-5
6-5-3 Setup Tab
The CPU Bus Unit System Setup, which is set when using socket services, is
shown in the CX-Programmer's Unit Setup Window.
.
■ Setup
Item Details Default value
Broadcast Set the method for specifying IP address
when broadcasting with FINS/UDP.
• All 1 (4.3BSD): Broadcast with host
number set to all ones.
• All 0 (4.2BSD): Broadcast with host
number set to all zeros.
For normal operations use the default:
All 1 (4.3BSD)
All 1 (4.3BSD)
IP Address Set local IP address for Ethernet Unit. 0.0.0.0 (Uses
192.168.250.FINS
node address)
Sub-net Mask Set the subnet mask of the Ethernet Unit.
This setting is required when the IP
Address Table method is not used for IP
address conversion.
0.0.0.0
(Uses default net-
mask of IP
address setting.)