Filter
Top Products
14
Mail Send Function Details Section 2-2
Note Another sentence will be attached indicating how the specified
word's value has changed: “Channel data has changed from XX to
XX.”
Ethernet Unit Information The Ethernet Unit information is always included in the e-mail.
• Model
• Version
• IP address (decimal notation)
• Subnet mask (decimal notation)
• IP address conversion method
Optional Information The optional information that can be included in the e-mail body is listed
below.
Different information can be selected with each mail trigger, and more than
one type of information can be selected. (The selections are specified in the
CPU Bus Unit System Setup.) If no optional information is selected, the e-mail
will not be sent even when the trigger condition is met.
■ User-set Information
User-set information is ASCII text set by the user in the CPU Unit's memory.
Up to 1,024 bytes of data can be sent from the user-set mail data address set
in the CPU Bus Unit Area.
Note (a) The user-set message sent in each e-mail can be changed just
by changing the contents of the relevant words in the CPU Bus
Unit Area. To change the user-set message easily, prepare sev-
eral messages in advance and copy the desired message to the
CPU Bus Unit Area when it is required.
The data set by the user is sent just as it is, and the code is not
converted.
(b) If there is a null code character (00 Hex) in the data, only the data
up to that point will be sent.
(c) The user-set data is sent as-is and the codes are not converted.
Change in CPU
Unit
This mail have been posted at changing CPU mode (PRG-
>MON)
This mail have been posted at changing CPU mode (PRG-
>RUN)
This mail have been posted at changing CPU mode (MON-
>PRG)
This mail have been posted at changing CPU mode (MON-
>RUN)
This mail have been posted at changing CPU mode (RUN-
>PRG)
This mail have been posted at changing CPU mode (RUN-
>MON)
This mail have been posted at changing CPU mode
(PowerON->PRG)
This mail have been posted at changing CPU mode
(PowerON->MON)
This mail have been posted at changing CPU mode
(PowerON->RUN)
This mail have been posted at CPU error occurrence(FAL)
This mail have been posted at CPU error occurrence(FALS)
Periodic timer This mail have been posted at regular intervals
Trigger
condition
Trigger-specific message in e-mail header