Onkyo ABX-N300 Laser Pointer User Manual


 
En-26
Network Setup
In order to use the media server function (playing back music files saved on a computer), AirPlay, or Internet radio, the
ABX-N300 must be connected to a network.
The ABX-N300 can connect to the network in either of two ways: wirelessly or by a cable. You’ll need to make the
settings that are appropriate for the type of network you’re using.
Connect the ABX-N300 to your wireless LAN or wired LAN as described in “Connections” (page 13).
The ABX-N300’s wireless LAN conforms to Wi-Fi.
A network is a setup in which multiple devices are connected by a cable (or wirelessly) so that they can communicate
with each other.
In a home, it is common to set up a network so that computers or game consoles can connect to the Internet, or so that
data can be transferred between multiple computers.
A network of this type that is limited to a relatively small area, such as a home, is called a Local Area Network (LAN).
If the ABX-N300 is connected to a network server such as a computer, it can play back music files stored on the network
server (computer), or connect to the Internet to play Internet radio.
In such cases, you do not connect the ABX-N300 directly to the other computer or to the Internet.
In order to connect to a computer or to the Internet, several other pieces of equipment (network devices) are required.
The following equipment is required in order to use the ABX-N300’s network functionality.
Router
A router is a device that sits between the ABX-N300 and a computer, or between the ABX-N300 and the Internet, and
controls the flow of data.
In a network, the flow of data is referred to as “traffic.” The router plays the role of a traffic controller between the
various devices.
For use with the ABX-N300, we recommend a broadband router that contains a 100Base-TX switch.
If you want to connect via wireless LAN, you’ll need to provide a wireless LAN router.
If your router has DHCP functionality, it will be easy to make network settings.
If you have a contract with an Internet Service Provider (ISP), use the router recommended by your ISP.
For more information about routers, please consult your dealer or your ISP.
Ethernet cable (CAT-5)
Ethernet cable is what is used to actually connect the devices making up the network. There are two types of Ethernet
cable: straight cables and cross cables.
The ABX-N300 uses an Ethernet straight cable that complies with CAT-5 standards. Consult your dealer for more
information on Ethernet cables.
If you’re connecting via a wireless LAN, an Ethernet cable is not needed.
Network server (such as a computer / if using a network server)
This is a device that stores music files and delivers them to the ABX-N300 for playback.
The requirements for use with the ABX-N300 will differ depending on the device you’re using as a network server
(see page 32).
For details about media servers supported by the ABX-N300, refer to page 32.
The conditions for optimal playback of music files on the ABX-N300 will depend on the network server (the
performance of the computer) that you’re using. For details on each device, refer to the owner’s manual of the
corresponding device.
Internet Access (for Internet radio)
To receive Internet radio, your Ethernet network must have Internet access. A narrowband Internet connection (e.g.,
56 K modem, ISDN) will not provide satisfactory results, so a broadband connection is strongly recommended (e.g.,
cable modem, xDSL modem, etc). Please consult your ISP or computer dealer if you’re unsure.
Notes:
To receive Internet radio with the ABX-N300, your broadband Internet connection must be working and able to access
the Web. Consult your ISP if you have any problems with
your Internet connection.
The ABX-N300 uses DHCP to configure its network settings automatically. If you want to configure these settings
manually, see “Network connections (Manual)” on page 29.
The ABX-N300 does not support PPPoE settings, so if you have a PPPoE-type Internet connection, you must use a
PPPoEcompatible router.
Depending on your ISP, you may need to specify a proxy server to use Internet radio. If your computer is configured
to use a proxy server, use the same settings for the ABX-N300 (page 30).
Network Essentials