Filter
Top Products
44
Security Measures
NOTE
When the Supervisor Password has not been set, the User Password can not be set.
Set the Supervisor Password if you have not done so. ( page 42)
To disable the User Password, start up the Setup Utility with the Supervisor Password.
1 Run the Setup Utility. ( page 88)
2 Using either or , select [Security].
3 Using either or , select [Set User Password] and press
Enter
.
4 Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
Enter
.
5 Enter your password at [Enter New Password] and press
Enter
.
To disable the User Password
Press only
Enter
.
6 Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the User Password
Press only
Enter
.
7 At [Setup Notice], press
Enter
.
8 Press
F10
and select [Yes], then press
Enter
.
CAUTION
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
Setting the User Password (enabling, changing, disabling)