Filter
Top Products
10
Starting Up/Shutting Down
Shutting Down
Using the suspend function
NOTE
You can use the suspend function by selecting [Suspend]
*
from the [Start] menu.
*
[Suspend] is deleted from the [Start] menu by unchecking [Allow Windows to manage power use on
this computer.] in [Start] - [Settings] - [Control Panel] - [Power] or by unchecking [Show suspend
command on Start menu] in [Advanced].
+
Suspend Mode
To shut down, save all data and select [Shut Down] from the
[Start] menu
1
If you want to immediately start up and continue an application after shutting down your com-
puter, you can do so by using the suspend or hibernation function.
Starting Up Your Computer Quickly
To quickly resume computer operation after shutting down,
the suspend and hibernation functions are available ( below).
NOTE
Shutting Down (power off your computer)
From the keyboard,
you may choose to press down on , then select [Shut Down].
2
Differences between the suspend function and hibernation function
Function Where data is saved to Speed Requires power supply
Suspend function Memory Fast Yes (if power is cut, all data is lost)
Hibernation function Hard disk Somewhat slow Power not required to maintain data
Restarting your computer in MS-DOS mode
Select after selecting [Restart in MS-DOS].
When returning to Windows 95 from the MS-DOS mode, type "EXIT" and not "WIN".
Returning to Windows 95 using the "WIN" command may result in a malfunction.
NOTE
NOTE
Restarting your computer (without shutting down)
Select after selecting [Restart].
Confirm shutdown
Select [Shut down], then press . Your computer will power off automatically..
(In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your computer
consumes approximately 1.1W.)