Filter
Top Products
17
Security Measures
Situation Function to use Reference
User Password below
Coffee break Password page 18
Prevent operation by using a floppy disk page 19
Supervisor Password page 19
Use a security lock page 43
You do not want your computer to be used without permission
Same as above, but while you’re away temporarily
You want to prevent theft or damage to data by using a floppy disk
You do not want your Supervisor Setup changed without permission
You want to prevent theft of your computer
To prevent unauthorized access of your computer, the various security measures are provided
below.
1
2
Setting the user password (enabling, changing, disabling)
4
3
To disable your password
Using the and keys, select [Delete User Password], then press . Go
to step 7.
CAUTION
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no dis-
tinction between upper and lower case letters.
White colored keys can be used. Note that the space bar and function keys
cannot be used.
Do not input your password while holding down on or .
Use only the upper horizontal row of numeric keys to input your user
password. The numeric keys combined with alphabet keys on the lower
keyboard cannot be used.
Do not forget your password. If a password is forgotten you will be un-
able to use your computer.
Run the Setup Utility ( page 40)
Using and , select [System Setup], then press
Using and , select [User Password], then press
To enable or change your password
Enter your password at the [Enter User Password], then press .
Set the User Password.
Without the password, access to your computer is impossible.
When the User Password is set
When you do not want your computer to be used without permission
* If you are starting from the suspend mode ( page 10), if
after three attempts the correct password is not input, or if no
password is entered for about a minute, the computer returns
to the suspend mode.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start*
(Power off)
Upon entering your
User Password and
pressing .