26
Hardware Expansion
NOTE
Some printer cables may be difficult to connect, and may require removal of the rear
cover. Take care not to lose the cover.
2
1
Connect the printer to your computer
CAUTION
Do not install or remove peripherals while your computer is in the suspend or hiberna-
tion mode; abnormal operation may result.
Do not shut down using the suspend or hibernation mode.
Power off your computer ( page 10)
Turn on the printer, then turn on your computer
3
Using a Printer
Setting your printer
Go to [My Computer] - [Printers]. Find your printer’s icon, double-click on it, and click
[File] - [Set As Default]. If no icon is available, select [Add Printer] and install the driver
program.
NOTE
4
You may need to install a driver for your printer. Simply follow the on-screen instructions
and refer to the operation manual for the printer on how to install the driver.
Connecting a Port Replicator
The port replicator (CF-VEB251) connects to the expansion bus connector on the bottom of
your computer.
When your computer is not connected to the port replicator, be sure that the expansion bus
connector on the bottom of the computer is covered.
For more detailed information, please refer to the operation instructions for the port replicator.
Parallel Port
Expansion Bus Connector