Filter
Top Products
31
Cannot read/write to a
floppy disk
Unable to write to a floppy
disk
How to format a floppy disk
is unclear
Unable to read/write to the
hard disk
No display after powering
on
The power has not been cut,
but after a certain period of
time, there is no display
An afterimage appears
The motion of the mouse
cursor is not smooth
The brightness can be adjusted with + .
When purchasing the computer, the display setting has been preset for an external display. If
you connect an external display, the screen is displayed on the external display.
When there is no display to an external display,
• Check your cable connection for the external display.
• Confirm your display is on.
If your computer is connected to an external display and the internal LCD has been set to
"off", and the computer is placed in the hibernation or suspend mode, the internal LCD
will remain in the "off" mode if the external display is not connected when the computer
is restarted. In this case, re-connect the external display and reboot the computer.
Has the computer been set to the power-saving mode?
To resume operation of your computer, press any key.
To save power, your computer may have automatically entered the hibernation mode.
( page 11).
If an image is displayed for a prolonged period of time, an afterimage may appear. This is
not a malfunction. The afterimage will disappear when a different screen is displayed.
Select [Start]-[Settings]-[Control Panel]-[Mouse]-[Motion] and check [Show pointer trails].
Display
Disk (Disc) Operations
is displayed
[Supervisor Setup] is not
displayed in the menu
[User Password] cannot be
selected
[Coffee break Password]
or [Key Combination for
Coffee break] cannot be
selected
[Supervisor Password]
cannot be set
Setup Utility
Has the floppy disk been correctly inserted?
Has the floppy disk been correctly formatted?
Your floppy disk drive may not have been properly set in the multimedia pocket.
Has the Setup Utility been used to set [Floppy Operation] to [Enable]?
Is the floppy disk write-protected? page 5
Select [Format] in [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming the disk
volume and format type, click .
Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
Your hard disk content may be corrupted. Consult your nearest Panasonic dealer.
Enter the User Password or Supervisor Password. If you have forgotten it, consult your
nearest Panasonic dealer.
At the start of the computer when is displayed, you have to enter the Supervisor Pass-
word. When both the User Password and Supervisor Password have been set, if you enter
the User Password, [Supervisor Setup] will not be displayed ( page 40).
If [Supervisor Setup] is not displayed even after entering the Supervisor Password, you have
to delete the User Password. Run the Setup Utility again, and input the Supervisor Password.
[User Password Protection] in [Supervisor Setup] may be enabled.
You need to set the User Password.
If the User Password has been set first, the Supervisor Password can not be the same as the
User Password. Another password needs to be entered.