Filter
Top Products
26
Getting Started
Using the Touch Pad
Use the touch pad to move the cursor on the screen and perform computer operations.
A. Work Surface (touch pad)
B. Left Button
C. Right Button
NOTE
z You can change the speed of the double-click or the operations of mouse but-
tons using [Mouse Properties] screen
• To display [Mouse Properties]:
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
z Sensitivity when touching the touch pad can be adjusted
(Î “Chapter 2: Using the Touch Pad” in onscreen Reference Manual)
z When an external mouse is connected and the cursor does not operate prop-
erly:
In the [Main] menu of the Setup Utility, set [Touch Pad] to [Disable]. When you
want to use the touch pad again, return the setting to [Enable]. (Î page 32)
z When using the touch pad, keep the following in mind.
• By design the touch pad is to be used with a finger tip only. Do not place any
object or press down forcefully with sharp-pointed objects, i.e. finger nails,
pencils, or pens on the work surface.
• Try to avoid having any harmful substances, such as oil, come in contact with
the touch pad. The cursor may not work properly in such cases.
Function Operation
Moving the Cursor
Move the tip of your finger lightly over
the work surface.
Tapping/Clicking
tapping or clicking
z A right-click: Can only be performed by clicking the
right button.
Double-Tapping/
Double-Clicking
double-tapping or double-clicking
Dragging
Two quick taps, but on the second tap leave your finger
down (applying pressure) and move it on the work sur-
face.
or
While holding down the button, move your finger on the
work surface.
Scroll Trace a circle around the edge of touch pad. (Î “Chapter
2: Using the Touch Pad” in onscreen Reference Manual)