Filter
Top Products
6
Preparations
Read Me First
For U.K. and Hong Kong
Warning
This apparatus must be earthed for your safety.
To ensure safe operation the three-pin plug must be
inserted only into a standard three-pin power point which
is effectively earthed through the normal household wir-
ing.
Extension cords used with the equipment must be three-
core and be correctly wired to provide connection to earth.
Wrongly wired extension cords are a major cause of fatal-
ities.
The fact that the equipment operates satisfactorily does
not imply that the power point is earthed and that the
installation is completely safe.
For your safety, if you have any doubt about the effective
earthing of the power point, consult a qualified electrician.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING
TEXT CAREFULLY
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 3 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 3 amps and that it is
approved by ASTA or BSI to BS 1362.
Check for the ASTA mark or the BSI mark on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code
as shown below.
If in any doubt please consult a qualified electrician.
Warning: THIS APPLIANCE MUST BE EARTHED.
Important
The wires in this mains lead are coloured in accordance
with the following code:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-and-YELLOW must
be connected to the terminal in the plug which is marked
by the letter E or by the safety earth symbol coloured
GREEN or GREEN-and-YELLOW.
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured Brown must be connected to
the terminal which is marked with the letter L or coloured
RED.
The mains plug on this equipment must be used to dis-
connect the mains power.
Please ensure that a socket outlet is available near the
equipment and shall be easily accessible.
How to replace the fuse
Open the fuse compartment
with a screwdriver and replace
the fuse.
Warnings
z This equipment is not designed for connection to an IT
power system.
(An IT system is a system having no direct connec-
tions between live parts and Earth; the exposed-con-
ducive-parts of the electrical installation are earthed.
An IT system is not permitted where the computer is
directly connected to public supply systems in the
U.K.)
z Disconnect the mains plug from the supply socket
when the computer is not in use.
This equipment is produced to BS800/1983.
A S A