Filter
Top Products
55
Troubleshooting
1 Connect the AC adaptor.
2 Change the settings in the setup utility.
Make the following settings.
z Return settings to the status at the time of shipment.
z Change settings to enable startup from DVD-ROM & CD-R/RW drive.
If you change the status of the computer from that at the time of purchase, we
recommend that you make a note of the settings that are changed.
A Turn on the computer, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
z If the password has been set, enter the Supervisor Password, and
press the
Enter
key.
B Press the
F9
key.
At the confirmation message, select [Yes] and press the
Enter
key.
C Select the [Boot] menu, then select [CD/DVD Drive] and press the
F6
key
until [CD/DVD Drive] is at the top of the [Boot] menu.
D Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
E Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
Reinstalling