Filter
Top Products
NETWORK FEATURE
NETWORK
FEATURE
107
Setting Up Your Machine for Relayed Transmission
Programming the End Receiving Station into your Auto Dialer
If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "Valid", you can enter the Relay Address
(ABBR No.) by the following procedure.
To set a One-Touch/ABBR for Relayed Transmission Request
Make sure that the INTERNET lamp is ON. If not, press to select the "INTERNET MODE".
1
2
Ex:
3
Press a One-Touch key (01-20).
Ex:
4
To change the input mode (between "ENTER EMAIL
ADDRESS" and "ENTER TEL. NO."), press or .
5
Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations are both in the
same area, omit the Country Code and the Area Code from
the End Receiving Station. The End Receiving Station is a
local telephone number as viewed from the Relay Station.
6
7
Enter the station name by using the character keys (up to 15
characters).
Ex:
8
1:ONE-TOUCH
2:ABBR NO.
ONE-TOUCH< >
PRESS ONE-TOUCH
<01>
E
NTER EMAIL ADDRESS
<01>
E
NTER TEL. NO.
<01>
3961111234
❚
<01> ENTER NAME
3961111234
R
O M E
<01> ROME
❚
3961111234
<01> RELAY ADDRESS
❚❚❚
Relayed Transmission
Continued on the next page...