Filter
Top Products
PROGRAMMING YOUR MACHINE
54
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001
CONTRAST
1 Lightest Setting the home position for the CONTRAST.
2 Lighter
3Normal
4Darker
5Darkest
002
RESOLUTION
*1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
003 ORIGINAL *1 Text Setting the home position for the ORIGINAL.
2 Text/Photo
3 Photo
004
STAMP
*1 Off
Setting the home position of the STAMP.
To select the stamp function when the document is stored in
memory, see Fax Parameter No. 28.
2On
005 MEMORY 1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING METHOD
1Pulse
Selecting the dialing method.
(Select Line-1 or Line-2 first, if you have the 2nd G3 Fax
Communication Port Kit installed)
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside
: Inside TX copy area.
Outside
: Outside TX copy area.
No Print
: Header does not printed.
2 Outside
3No Print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
bottom of each received page.
2 Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Medium
4 Loud
012
COMM. JOURNAL
1 Off Selecting the home position for the printing mode of the COMM.
Journal Off/Always/INC.
Off
: Does not print
Always
: Always prints
Inc. Only
: Prints only when communication has failed.
2Always
*3 Inc. Only
Customizing Your Machine