Filter
Top Products
GETTING TO KNOW YOUR MACHINE
GETTING TO
KNOW YOUR
MACHINE
15
For the total system to work properly via LAN, certain information and additional parameters must be set. Please
contact your network administrator for the required information and connection to the LAN.
Important:
Make a copy of this page and ask the Network Administrator to complete the required information. After its
returned, transfer the information to the back side of the front cover for future reference and troubleshooting.
(see Note 1) (see Note 2) (see Note 3) (see Note 4)
User Information
Company Name
Address
Dept.
City State Zip Code
Tel. No. Fax No.
Internet Parameters (See page 26)
(1)
IP Address:
(2)
Subnet Mask:
(3)
*SMTP Server Name:
or
*SMTP Server IP Address:
(4)
Default Router IP Address:
(5)
Email Address:
(6)
DNS Server IP Address:
(7)
POP Server Name:
or
*POP Server IP Address:
(8)
POP User Name:
(9)
POP Password:
(10)
Host Name:
(11) Default Subject:
(12) Default Domain:
(13) Selectable Domains:
1. 6.
2. 7.
3. 8.
4. 9.
5. 10.
(14) Remote Password:
(15) Relay XMT Password:
(16) Manager’s Email Address:
(17) Relay Domains (Domains Authorized for Relay Transmission):
1. 6.
2. 7.
3. 8.
4. 9.
5. 10.
NOTE
1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP and POP
Server Names (items 3 and 7 above). If the DNS Server is not available, change the Fax Parameter No. 161 (DNS
SERVER) to "1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of the DP-2000 can be obtained from the 2nd page of the Fax Parameter List
printout, by pressing
.
4. Dynamic Host Configuration Protocol (DHCP) is not supported.
FUNCTION
6
4
SET
Pre Installation Information
Continued on the next page...