Filter
Top Products
PROGRAMMING YOUR MACHINE
PROGRAMMING
YOUR MACHINE
57
088 LINE SELECTION
[See Note 4]
*1 Auto Setting the home position for the Telephone Line selection.
Auto
:Selects the available telephone line for transmission
automatically.
Line-1
:Selects this as the default telephone line, unless manually
selecting an alternate phone line.
Line-2
:Selects this as the default telephone line, unless manually
selecting an alternate phone line.
2Line-1
3Line-2
089 LIST OUTPUT TRAY *1 Inner 1 Selecting the Output Tray home position for List printout.
Inner 1
: The List printout exits to the Bottom Output Tray.
Inner 2
: The List printout exits to the Upper Output Tray (Blue).
2 Inner 2
3 Outer
095 DUPLEX PRINT *1 Invalid Selecting whether the machine performs duplex print.
2Valid
097 SPECIAL TRAY
No.1 - 3
*1 None Select up to 3 Special Trays that will not be used for printing
received faxes (4-Tray configuration). One Tray must always be
available for receiving Faxes.
(You can specify one Tray (1 ~ 4) for each selection No. 1, No. 2
and/or No. 3)
2 Tray 1
3 Tray 2
4 Tray 3
5 Tray 4
099 MEMORY SIZE
(Flash Memory)
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2Valid
141 LAN XMT REDUCTION
*1 Invalid
Selecting whether to automatically reduce from LEDGER / B4 to
A4, when LEDGER / B4 documents are transmitted via LAN.
Invalid
: No reduction
Valid
: Automatic reduction from LEDGER / B4 to A4
2Valid
142 RELAY XMT
(a.k.a. LAN RELAY
STATION on UF-770i)
1 Invalid Selecting whether the machine accepts and performs G3 relayed
transmission. (Relay Station Functions)
*2 Valid
143 RELAY XMT REPORT
1Off
Setting how the COMM. Journal for relayed transmission is sent to
the originator.
Off
:Don’t send.
Always
: Always send.
Inc.Only
: Send only if communication has failed.
*2 Always
3 Inc. Only
144 EMAIL CHARACTER
SET
1 Japanese Selecting the Character Set when receiving or sending email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email address
before each transmission.
2Valid
146 POP TIMER -- 0 to 60 min. Setting the time interval for the machine to check for email on the
POP Server.
(0 = Does not check the POP Server for email. )
3 *3 min.
147 AUTO POP RCV
(See Note 3)
1 Invalid Selecting whether the machine automatically downloads an email
from the POP Server.
*2 Valid
Continued on the next page...
No. Parameter
Setting
Number
Setting Comments
Customizing Your Machine