Filter
Top Products
BASIC OPERATIONS
78
Receiving Email from a POP Server
The DP-2000 offers a choice to receive and print Internet email messages via LAN unattended or manually when
subscribing to a POP mail server.
Setting the POP Parameters
Set the parameters pertinent to the POP server (Fax Parameters Nos. 146 to 149).
No. 146 (POP TIMER): Enter the interval to check and retrieve email from the POP server (0 to 60 minutes).
If "0 minutes" is entered, the POP server is not checked for mail.
No. 147 (AUTO POP RCV): When there is mail to be retrieved from the POP server, the DP-2000 will retrieve it
and print the email unattended. If this parameter is set to "1:Invalid", the machine will not retrieve it, but
displays the number of mails on the POP server.
No. 148 (DEL POP RCV MAIL): Select whether the email is deleted from the POP server after it is retrieved by
the DP-2000.
No. 149 (DEL POP ERR MAIL): Select whether to delete the email from the POP server when the file
attachment format is not supported.
To set the above POP parameters, follow the steps below
.
Make sure that the INTERNET lamp is ON. If not, press to select the "INTERNET MODE".
1
2
3
4
Enter the desired download interval (0 to 60 minutes).
Ex:
for 5 minutes.
If you make a mistake, press to erase the digit
and then re-enter the correct value.
SET MODE (1-4)
ENTER NO. OR
∨ ∧
FAX PARAMETER(1-164)
2:ABBR NO.
146 POP TIMER
3 MIN. (0-60)
0 5
CLEAR
146 POP TIMER
5 MIN. (0-60)
Receiving Documents via LAN