Filter
Top Products
11
■ The copier should not be installed in areas with the
following conditions:
CExtremely high or low temperature and humidity.
Ambient conditions Temperature: 10 – 30°C
Relative humidity: 30 – 80 %
CWhere temperature and humidity can change
rapidly, causing condensation.
CDirect exposure to sunlight.
CDirectly in the air conditioning flow.
CIn areas of high dust concentration.
CIn areas of poor ventilation.
CIn areas with chemical fume concentration.
CIn areas with extreme vibration.
CWith unstable or uneven conditions (floors, etc.).
Installation
Precautions
Before Starting
FOR YOUR SAFETY
■ The maximum power consumption is 1.45 kW.
A properly wired (grounded), dedicated, 6.5A, 220-240V AC outlet is required. Do not use an
extension cord.
Caution Note: Disconnect from the mains supply before removing covers.
CTHIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.
CAUTION
P010-011_4510(pb).p65 7/31/02, 10:44 AM11