Filter
Top Products
58
B4·FLS
NOTE
Skyshot Mode
12
Place the
Original*
Touch the JOB
MEMORY button
This setting should be carried out by a Key Operator.
#Select the COPIER SETTINGS in Function Setting
mode.
(See page 68)
$Touch the FG buttons to advance to the 04/04
Display Screen of Copier Settings menu.
%Touch the 19 Set key operator code button.
&Enter the Key Operator’s ID Code and then press
the OK button.
(Touch the FG buttons to advance to the 03/05
Display Screen.
)Select 12 M1, size and 13 M2, size and enter the
original’s size.
*Touch the OK button.
∗
If using i-ADF, place original on the centre position of ADF Tray. The i-ADF tray can be
fed only 50 -105 g/m
2
plain paper.
CWhen changing the M1 or M2 Size, consult with the key operator.
CWhen using the manual skyshot mode, the M1 and M2 are turned On and other job
memory cannot be used.
CTo reset the manual skyshot mode, press the RESET key.
Changing the default M1/M2 size
34
Number of
Copies
5
Press
START
Select Custom
Size (M1 or M2)
2
A
3
CC
CC
CSet 07 Manual Skyshot Mode in Copier Settings first. (See page 53)
Upper-
Left
Corner
Platen
■■
■■
■ Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in advance.
Other Features
P058_4510(pb).p65 7/31/02, 10:45 AM58