Filter
Top Products
57
Making Copies
B4·FLS
NOTE
Other Features
Skyshot Mode
■■
■■
■ Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in
advance. (See page 72)
■■
■■
■ Digital Skyshot Mode
1
Place the Original on the platen
(Opening the Platen Cover/ADF)
3
Press START
#Press the FUNCTION Key.
$Touch the COPIER SETTINGS button.
%Touch the [ button to advance to the 02/04 Display
Screen of Copier Settings menu.
&Touch the 06 Digital skyshot mode button.
(Select the desired function and touch the OK button.
06 Digital skyshot setting
No : None
Freeshp (Free shape) : Copy is made with slant.
Parallel : Copy is made to parallel.
(within 5 degrees)
CAn incorrect exposure may occur when there is a black line at the edge of
the original or an image which the copier interprets as a black pattern in the
skyshot mode.
CAn incorrect position detection of the original may occur when a strong light
shines onto the glass during skyshot mode.
Select the Digital Skyshot Mode
The Digital Skyshot has been 2 modes ( or ).
The default setting of Digital Skyshot Mode is “None”.
Before using this mode, select each setting by using the Function setting.
(
2
)
copy
copy
copy
copy
P056-057_4510(pb).p65 7/31/02, 10:45 AM57