Filter
Top Products
72
Copier Settings for Key Operator
NOTE
■■
■■
■ Input the Key Operator ID Code to change Settings
Screen
No.
Modes
Initial
Setting
Function
03/05
10 Maximum copy setting Determines whether to limit number of copies
(0-99).
Input a size in job memory 2 for frequently
used size.
CX: 5~432/Y: 5~297 mm
(See page 54)
0
(No limit)
13 M2, Size
95 × 220 mm
(X) (Y)
70 × 160 mm
(X) (Y)
Input a size in job memory 1 for frequently
used size.
CX: 5~432/Y: 5~297 mm
(See page 54)
12 M1, Size
04/05
16 Memory overflow
warning
Selects the task to perform when memory
overflow occurs
CPrint, Cancel
Print
17 Toner save mode (T) Selects the toner save in Text mode.
CNone, Level 1, Level 2*
None
18 Toner save mode (T/P) Selects the toner save in Photo/Text mode.
CNone, Level 1, Level 2*
None
CIt is necessary to input the Key Operator ID code before changing items on this page.
∗
Toner will be saved when selecting the Level 1 or 2 but copy quality will be dropped
less than None mode when selecting the Level 1 or 2.
Save value (Panasonic authorised 6 % density original):
Level 1: maximum approximately 10 % less than None mode.
Level 2: maximum approximately 20 % less than None mode.
Function
19 Toner save mode (P) Selects the toner save in Photo mode.
CNone, Level 1, Level 2*
None
P072-073_4510(pb).p65 7/31/02, 10:50 AM72