Filter
Top Products
70
NOTE
CIt is necessary to input the Key Operator ID code before changing items on
this page.
∗
When the No. 36 to 39 function is set, turn OFF and ON the Power Switch.
■■
■■
■ Input the Key Operator ID Code to change Settings
Screen
No.
Modes
Initial
Setting
Function
07/09
30 Sleep/Off mode
selection
Selects Sleep or Auto Off mode.
CSleep, Auto Off
Sleep
Sets print of general function.
CStop, Start
31 General settings print
0
08/09
Input parameter of user machine.35 Tandem user parameter
Input group ID for address book.
C0 ~ 99
34 Address book group ID
36 Community Name(1) Selects to change the SNMP of Community
Name (1).*
CEnables read only.
Function
Selects to change the SNMP of Community
Name (2).*
CEnables read/write.
37 Community Name(2)
Input the device name when necessary.*
(For Status Monitor/EtherTalk Machine Name)
38 Device Name
Input the device location when necessary.*
(For Status Monitor)
39 Device location
Sets clean the corona wire.
COff, On
32 Corona wire cleaning
Indicates the MAC address.33 MAC address
GENERAL FUNCTIONS for Key Operator
Sets the daylight time.
C No, Yes
40 Daylight time Yes
09/09
P070-071_4510(pb).p65 7/31/02, 10:50 AM70