Filter
Top Products
2. Initial Preparation
Setting the date and time
12
1
Press (MENU).
2
Press
K
, then
@A
.
3
Press
(START/SET)
.
4
Enter the correct month/day/year/hour/minute
by selecting each 2 digits.
Then press
j
for AM or press
k
for PM.
Example: Aug. 10 1996, 3:00PM
Press
`h a` iF `c ``
,
then press
k
for PM.
5
Press
(START/SET)
.
6
Press
(MENU)
.
SET DATE & TIME
SYSTEM SET UP
Note:
¡When you make a mistake while programming,
press (STOP) then make the corrections.
¡The accuracy of the clock will be approximately
t60 seconds a month.
1
Press (MENU).
2
Press
K
, then
@B
.
3
Press
(START/SET)
.
4
Enter your logo up to 30 characters.
(The preset logo will be cleared.)
¡
Refer to the instructions on page 13.
5
Press
(START/SET)
.
6
Press
(MENU)
.
LOGO=
YOUR LOGO
SYSTEM SET UP
Usually the logo is a company, division or personal name in an abbreviated form.
Before using your unit, program the following:
¡Current date and time
¡Your logo
¡Your facsimile telephone number
This information will be printed on the top of each page transmitted from your unit.
(MENU)
(START/SET)
Dial keypad
(STOP)
Setting your logo
(MENU)
(START/SET)Dial keypad