Filter
Top Products
39
8
8. Advanced Operations
Polling
Receive polling
The polling feature allows you to receive a document from another compatible machine where you pay for the
call as opposed to the document being sent to you, thereby saving the other party call charges. This unit can
perform both receive and transmit polling.
1
Press (MENU) until the following is displayed.
2
Press (START/SET).
3
Enter the phone number by using one-touch
dialing, speed dialing, full number dialing or
electronic telephone directory.
4
Press (START/SET).
Note:
¡If there is no answer or the line is busy, the unit
will automatically redial the number up to 2 times.
¡The receiving unit incurs any telephone charges.
NO.=
POLLING
A document stored in your unit can be recovered by another party’s machine.
To let other machines retrieve documents loaded on your unit, proceed as follows.
This feature is not available in the TEL mode.
1
Insert the documents FACE DOWN.
2
Press (MENU) until the following is displayed.
3
Press (START/SET).
4
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/SET).
Note:
When delayed transmission (page 40) is set to ON,
this feature is not available.
POLLED ON
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
POLLED
To place a call and recover a document from another machine, follow the steps below. Make sure that no
documents have been fed into your unit and that the other party’s machine is ready for your call.
Transmit polling
FACE DOWN
(MENU)
(RECEIVE\MODE)
(START/SET)
(‹)/(›)
(MENU)
(START/SET)Dial keypad