Filter
Top Products
54
8. Advanced Operations (KX-F1100AL only)
Listening to messages in a mailbox
1
Press (MAIL\BOX) repeatedly until the
desired mailbox number is displayed.
Example: Mailbox 2
2
Enter the mailbox password.
Example: The password 555 (factory
setting)
¡The unit will play back the new recorded
messages.
¡If no new messages are recorded, the unit
will play back all of the recorded messages.
3
To exit the mailbox, press (MAIL\BOX).
Note:
¡If you leave the mailbox password as “555”
(factory setting), you need not enter a password.
Press (NEW\MESSAGES) or (ALL\MESSAGES)
instead of a password.
¡(REPEAT), (SKIP) and (STOP) can be used.
PASSWORD=555
BOX2 02
When there is a new message in a mailbox,
—the mailbox number will flash in the display, and/or
—a slow beep will sound if mailbox alert (page 55) is set to ON.
Erasing recorded messages in a mailbox
CALLS
MAIL BOX
FAX TELTEL/
FAX
FILM/PAPER SAVE
2
ANS/
FAX
(MAIL\BOX)
Erasing a specific message in a
mailbox
Press (ERASE) while the message you want to
erase is playing.
Erasing all messages in a mailbox
1
Press (MAIL\BOX) repeatedly until the
desired mailbox number is displayed.
Example: Mailbox 1
2
Press (ERASE).
3
Press (START/SET).
ERASE COMPLETED
BOX1 ERASE OK?
BOX1 02
(MAIL\BOX)
(START/SET)
(NEW\MESSAGES)
(ALL\MESSAGES)
Dial keypad
(ERASE)
Example: Mailbox 2