Filter
Top Products
8. Advanced Operations
40
Delayed transmission
The unit can send fax documents automatically at a specific time. This allows you to take advantage of low-
cost calling hours offered by your telephone company.
Delayed transmission can be programmed up to 24 hours in advance.
11
Insert the documents FACE DOWN.
12
Press (MENU).
13
Press K, then press BE.
14
Press (START/SET).
15
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
16
Press (START/SET).
17
Enter the phone number by using one-touch
dialing, speed dialing, full number dialing or
electronic telephone directory.
18
Press (START/SET).
19
Enter the transmission start time.
Example: 11:00PM
Press aa``, then press k to
select PM.
To select AM, press j.
10
Press (START/SET).
11
Press (MENU).
¡When the programmed time has come, the
unit will automatically start transmission.
TIME=12:00AM
NO.=
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
DELAYED XMT
SYSTEM SET UP
Note:
¡If there is no answer or the line is busy, the unit
will automatically redial the number up to 2 times.
¡You can receive, transmit and copy documents
while delayed transmission is set.
¡If the programmed start time has passed during a
power failure, delayed transmission will be
attempted soon after power is restored.
¡When transmit polling (see page 39) is set to ON,
delayed transmission is not available.
FACE DOWN
(MENU)
(‹)/(›)(START/SET)
Dial keypad