Filter
Top Products
4
1. Installation and Connection
1
Open the top cover.
2
Press the green button on the right marked
“PUSH” and lift up the head unit.
3
Place the cartridge with the “BACK” indicator
facing up and tighten the film by winding the
gears if there is slack.
4
Place the “BACK” side of the cartridge into
the unit, by inserting the pins on the sides of
the green gears into the green holders. Then
lower the front of the cartridge into place.
5
Press the head unit down firmly to lock in
place.
6
Close the top cover securely by pushing
down on both sides.
PUSH
BACK
BACK
BACK
BACK
PUSH TO LOCK
Green button
Top cover
Head unit
Green holder
Green gear
Gear
Installing the film cartridge
Note:
Because the length of the included film is 30 meters, it is recommended to purchase 200 meter length film for
replacement soon. See page 82.
Incorrect Correct
Slack