Filter
Top Products
38
Voice contact
Initiating voice contact
8. Advanced Operations
You can have a voice conversation with the same call after the fax message is completed. This will save the
extra expense and time of making another call.
Important:
This feature works only when the other party’s unit is equipped with a voice contact feature.
1
Press (SP-PHONE/VOICE\STDBY) while
transmitting or receiving documents.
¡Your unit will call the other party with a
distinctive ring.
2
When the other party answers, the unit will
emit a distinctive ring.
Press (SP-PHONE/VOICE\STDBY) or lift the
handset to start speaking.
¡If you initiate voice contact during
transmission, you can speak after all the
documents have been transmitted.
¡If you initiate voice contact during reception,
you can speak after the current page of the
document is received.
VOICE STANDBY
If the other party initiates voice contact, your unit will emit a distinctive ring after transmission or reception is
completed.
When the distinctive ring is heard, press (SP-PHONE/VOICE\STDBY) or lift the handset, then start speaking.
Note:
If you do not answer within 10 seconds of hearing the distinctive ring, the line will be disconnected.
But if your model is KX-F1100AL and the ANS/FAX mode is used, the answering system will automatically
answer the line and record the incoming voice message.
(SP-PHONE/VOICE\STDBY)
Receiving a request for voice contact