Filter
Top Products
10
1
A Open the back lid by lifting up the tabs
located on both sides.
B Install a recording paper roll in the main
unit.
¡Make sure that the shiny side of the
paper is facing down and there is no
slack, tape, or glue residue on the paper
roll.
Note:
¡Only use the included roll of paper or specified recording paper, or else the print quality may be affected
and/or excessive thermal head wear may occur.
¡The beginning of some recording paper rolls are secured with glue or tape.
Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation.
¡To order recording paper, see page 67.
A
B
2
Insert the leading edge of the recording paper
between the recording paper roller and the
silver plate.
3
Close the back lid by gently pressing down
on both ends.
correct
incorrect
Recording paper roller
Silver plate
Tab
Installing your unit
Installing the recording paper