Filter
Top Products
22
1
Open the document feeder tray.
2
Insert the documents FACE DOWN until a beep
tone is heard.
¡The unit can accept up to 15 sheets of paper at a
time.
3
Adjust the document guides to the width of the
document.
4
Press (RESOLUTION) repeatedly to the desired
setting.
For printed or
typewritten originals
with normal-sized
characters.
For originals with small
printing.
For originals with
minute printing.
For originals containing
photographs, shaded
drawings, etc.
Transmitting documents
Documents you can send
Note:
¡Remove clips, staples or other similar fastening objects.
¡Check that ink, paste or correction fluid has dried.
¡Do not send the following types of documents. Use copies for fax transmission.
—Chemically treated paper such as carbon or carbonless duplicating paper
—Electrostatically charged paper
—Heavily curled, creased or torn paper
—Paper with a coated surface
—Paper with a faint image
—Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)
Loading documents
128 mm
(5w)
128 mm
(5w)
600 mm
(23
5
⁄8w)
216 mm
(8
1
⁄2w)
Paper width
216 mm (8
1
⁄2w)
208 mm (8
3
⁄16w)
Scanned
area
4 mm
Minimum size Maximum size Effective scanning area Document weight
Single sheet:
45 to 90 g/m
2
(12 to 24 lb.)
Multiple sheets:
60 to 75 g/m
2
(16 to 20 lb.)
Note:
¡Using the fine, super fine or half tone setting
will increase transmission time.
¡If the resolution setting is changed during
feeding, it will be effective from the next
sheet.
¡The super fine resolution only works with
other compatible machines.
Document
guides
FACE DOWN
(RESOLUTION)
Document feeder tray
STANDARD
FINE
SUPER FINE
HALF TONE