41
Advanced
Operations
Receiving using an extension
2 3
4 5 6
7 8 9
0
1
1
Press (MENU).
2
Press K, then D A.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select the desired setting.
¡If this feature is not required, select “OFF”.
5
Press (START/COPY/SET).
6
Enter the new code number.
7
Press (START/COPY/SET).
8
Press (MENU).
CODE=UU
MODE=ON [ÿŸ]
REMOTE FAX ACT.
SYSTEM SET UP
Remote fax receiving
(using an extension to receive a fax message)
If you have an extension phone connected to the main unit or on the same line, it is possible to receive a fax
message by operating the extension phone. Using the extension phone, dial the remote fax activation code.
This saves you from going to the main unit and pressing (START/COPY/SET).
Important:
¡To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
¡The remote fax activation code is set to UU as a pre-selected setting.
¡If your line has a rotary pulse service, press J before pressing the remote fax activation code.
1
When a call is received, lift the handset of the
extension phone.
2
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter J J (pre-selected remote fax
activation code) FIRMLY.
3
Hang up the handset.
¡The main unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character *.
Note:
¡Some special telephone company services
will require you to press a service access
code. If you subscribe to such services, whole
or part of the remote fax activation code must
be different from the service access code.
¡If the remote fax activation code is set to
“0000”, the unit does not work properly.
(MENU)
Dial keypad
(START/COPY/SET)
To the EXT jack
or the same line
Extension phone
(‹) (›)