Filter
Top Products
48
2 3
4 5 6
7 8 9
0
1
Setting the remote TAM activation ID
If your answering machine is equipped with a remote operation feature, set the same access code on the
facsimile unit as programmed on the answering machine. This feature prevents the main unit from activating
the fax function when you operate the answering machine from a remote location. This code can be from 1 to
5 digits in length.
Important:
¡This code should be different from the remote fax activation code (see page 41) and the junk mail prohibitor
ID (see page 42).
(MENU)
(START/COPY/SET)
Dial keypad
(‹)
1
Press (MENU).
2
Press K, then press A B.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select “ON”.
5
Press (START/COPY/SET).
¡The display will show the pre-selected ID.
6
Enter the new ID number using the dial
keypad.
7
Press (START/COPY/SET).
8
Press (MENU).
ID=11
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
REMOTE TAM ACT.
SYSTEM SET UP
(›)