Filter
Top Products
23
456
789
0
1
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
1
Press (MENU).
2
Press K, then @B.
3
Press (START/COPY/SET).
4
Enter your logo up to 30 characters.
¡Refer to the instructions on page 15.
5
Press (START/COPY/SET).
6
Press (MENU).
LOGO=
YOUR LOGO
SYSTEM SET UP
(START/COPY/SET)
(MENU)
Dial keypad
14
23
456
789
0
1
Setting the date, time, logo and facsimile
telephone number
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number.
This information will be printed on the top of each page transmitted from your unit.
To change the print position, see page 40.
Setting the date and time
1
Press (MENU).
2
Press K, then @A.
3
Press (START/COPY/SET).
4
Enter the correct month/day/year/hour/minute
by selecting each 2 digits.
Then press J for AM or K for PM.
Example: Aug. 10 1996, 3:00PM
Press @H A@ IF @C
@@, then press K for PM.
5
Press (START/COPY/SET).
6
Press (MENU).
SET DATE & TIME
SYSTEM SET UP
(MENU)
(STOP)
(START/COPY/SET)
Dial keypad
Note:
¡If you make a mistake while programming,
press (STOP) then make corrections.
¡The accuracy of the clock will be
approximately L60 seconds a month.