40
2 3
4 5 6
7 8 9
0
1
Sending documents overseas
You may experience difficulty in transmitting documents overseas. This feature will make sending documents
easier as the transmission speed is slowed down. Before starting the transmission procedure, follow the steps
below.
1
Press (MENU).
2
Press K, then B C.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/COPY/SET).
6
Press (MENU).
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
OVERSEAS MODE
SYSTEM SET UP
Note:
¡After transmission, this feature will be turned off
automatically.
(MENU)
Dial keypad
(START/COPY/SET)(‹) (›)
Changing the logo print position
The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document’s paper size (pre-selected setting).
IN: Inside of the transmitted document’s paper size.
1
Press (MENU).
2
Press K, then B A.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select the desired
setting.
5
Press (START/COPY/SET).
6
Press (MENU).
MODE=OUT [ÿŸ]
LOGO POSITION
SYSTEM SET UP
2 3
4 5 6
7 8 9
0
1
(MENU)
Dial keypad
(START/COPY/SET)(‹) (›)