7. Answering Machine
41
Incoming Messages
7.2 Listening to recorded
messages
When the unit has recorded new voice messages:
–The {AUTO ANSWER} indicator will flash when auto
answer is turned ON.
– The total number of recorded messages will flash on
the base unit display.
7.2.1 To play back messages
Press {PLAYBACK}.
L Only new messages will be played.
L After playing back all of the new messages, the
{AUTO ANSWER} indicator will stop flashing but will
remain lit up when auto answer is turned ON. If you
press {PLAYBACK} at this time, all the recorded
messages will be played.
7.2.2 Useful features during playback
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the beginning of
the message, the previous message will be played.
L To play back a specific message, press {<} or {>}
and search for the message you want to listen to.
To skip a message
Press {>} to play the next message.
Voice time/day stamp
During playback, the unit will announce the day of the
week and time that each message was recorded.
If you subscribe to Caller ID service
During playback, you can call back the displayed name
or number using the base unit.
1. Press {MENU} during playback.
L The base unit stops playback.
L If you do not need to edit the telephone number,
skip to step 3.
2. Edit the telephone number (page 24).
3. {SP-PHONE}
7.2.3 Erasing recorded messages
To erase a specific message
Press {ERASE} while listening to the message you want
to erase.
To erase all messages
1. {ERASE}
2. Within 5 seconds, press {ERASE}.
Memo Message
7.3 Leaving a message for others
or yourself
You can record a voice memo to leave a private message
for yourself or someone else. Recorded messages are
treated as new messages.
1 {MEMO}
L A long beep will sound.
2 Speak clearly about 20 cm away from {MIC}.
3 To stop recording, press {STOP}.
Note:
L If you record for over 3 minutes, the unit will stop
recording.
{SP-PHONE}
{<}{>}
{MENU}
{ERASE}{PLAYBACK}
AUTO ANSWER
FC228HK-PFQX2656ZA-en.book Page 41 Thursday, August 31, 2006 11:35 AM