Filter
Top Products
8. Programmable Features
50
Setting recall (flash)
time (for the base unit
and cordless handset)
{#}{7}{2} The flash time depends on your telephone exchange or host PBX.
{1} “900msec.”
{2} “700msec.”
{3} “600msec.”
{4} “400msec.” (default)
{5} “300msec.”
{6} “250msec.”
{7} “200msec.”
{8} “160msec.”
{9} “110msec.”
{*} “100msec.”
{0} “90msec.”
{#} “80msec.”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Changing the receiving
mode in the manual
answer setting
{#}{7}{3}{1} “TEL” (default): Telephone mode (page 33)
{2} “TEL/FAX”: Telephone/Fax mode (page 34)
Setting the connecting
tone
{#}{7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting
{#}{7}{7}{1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 35)
{2} “FAX ONLY”: Fax only mode (page 35)
Changing the TEL/FAX
delayed ring count
{#}{7}{8} If you use an extension telephone when this unit is in TEL/FAX
mode, select the desired number of times the extension
telephone rings before the unit answers the call.
{1} “1”
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
See page 34 for details.
Feature Feature code Selection
FC228HK-PFQX2656ZA-en.book Page 50 Thursday, August 31, 2006 11:35 AM