Filter
Top Products
5. SMS (KX-FC235AL only)
45
5.6 Guide to SMS settings
Important:
L All SMS-related settings and messages
will be deleted or reset to their default
settings by resetting handset
programming that use the base unit PIN
(page 80).
L Keep the front cover page open for button
locations.
5.6.1 Creating private mailboxes
Private mailboxes can be used for sending and
receiving SMS messages. Each private mailbox
is password protected.
1 Press {j/OK}.
2 Select “SMS”, then press {>}.
3 Select “Public”, then press {>}.
4 Select “Settings”, then press {>}.
5 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
6 Select “Private Mailbox”, then press
{>}.
7 Select the desired new mailbox number
(“Mailbox1” to “Mailbox6”), then press
{>}.
8 Enter a name for the mailbox, up to 5
characters (see page 46 for character entry),
then press {j/OK}.
9 Enter a 4-digit password for the mailbox, then
press {j/OK}.
10 Select “Save”, then press {>}.
11 Press {ih}.
Note:
L To receive SMS messages using a mailbox,
inform others of your mailbox number.
5.6.2 Changing private mailbox
settings
You can change the password or name of the
private mailbox and erase the mailbox.
1 Press {j/OK}.
2 Select “SMS”, then press {>}.
3 Select “Public”, then press {>}.
4 Select “Settings”, then press {>}.
5 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
6 Select “Private Mailbox”, then press
{>}.
7 Select the desired mailbox name, then press
{>} 2 times.
8 Enter the mailbox’s 4-digit password.
9 Edit the mailbox name, up to 5 characters
(see page 46 for character entry), then press
{j/OK}.
L To erase the mailbox, press and hold
{C/T}, press {j/OK}, select “Yes”,
press {>}, then press {ih} to finish.
10 Enter a 4-digit password for the mailbox, then
press {j/OK}.
11 Select “Save”, then press {>}.
12 Press {ih}.
Note:
L If you change the name of a mailbox which
has messages in the receive list, the
messages will remain in the receive list under
the new mailbox name.
L If you erase a mailbox, its messages will also
be erased.
5.6.3 Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (up to 4
digits) so that SMS messages are sent properly.
When sending SMS messages to items in the
handset phonebook or redial list, the PBX line
access number will be deleted.
1 Press {j/OK}.
2 Select “SMS”, then press {>}.
3 Select “Public”, then press {>}.
4 Select “Settings”, then press {>}.
5 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
6 Select “PBX Access No.”, then press {>}.
7 Select “On”, then press {>}.
8 Enter your PBX line access number (up to 4
digits) and a dialling pause, if necessary,
then press {j/OK}.
9 Select “Save”, then press {>}.
10 Press {ih}.
FC235AL-PFQX2248ZA_en.book Page 45 Monday, June 20, 2005 2:19 PM