Panasonic KX-FC231NZ Fax Machine User Manual


 
10. Programmable Features
79
Storing/changing emergency numbers
These settings determine which telephone
numbers can be dialled while the call bar feature
is ON (page 77).
1. Press {j/OK}.
2. Select Base Unit Setup, then press
{>}.
3. Enter 0000 (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select Call Options, then press {>}.
5. Select Emergency No., then press {>}.
6. Select a memory location, then press {>}.
L If the memory location already contains
an emergency number, the number is
displayed.
7. Enter/edit the number, then press {j/OK}.
L To erase an emergency number, press
and hold {C/T}.
8. Press {ih}.
Note:
L The default setting for emergency numbers
are stored in the first 2 memory locations
(KX-FC235AL)/3 memory locations (KX-
FC231NZ). It is recommended that you do
not overwrite these numbers.
Selecting area codes to be deleted
automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 36) will
include area codes. If you do not want to dial the
area codes when making calls from the Caller ID
list, you can store the area codes which you want
the unit to delete automatically.
Example: You have stored the area code 123.
If you make a call from the Caller ID list to the
phone number 123-456-7890, the unit dials
456-7890.
1. Press {j/OK}.
2. Select Base Unit Setup, then press
{>}.
3. Enter 0000 (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select Call Options, then press {>}.
5. Select ARS Settings, then press {>}.
6. Select Area Code, then press {>}.
7. Select an area code location (1-4), then
press {>}.
L If the location already contains an area
code, the code is displayed.
8. Enter an area code (5 digits max.), then
press {j/OK}.
9. Press {ih}.
Note:
L The use of this feature can prevent a National
Call from being dialled. E.g., in the case of
the South Island, the 03 will be omitted and
will therefore prevent a National Call to other
areas of the South Island. (for New Zealand
users only)
Setting call restriction
You can restrict selected handsets from dialling
certain numbers. You can assign up to 6 phone
numbers to be restricted, and select which
handsets will be restricted. Storing area codes
here will prevent the restricted handsets from
dialling any phone number in that area code. If a
restricted number is dialled, the call will not be
connected and the restricted number will flash
on the display.
1. Press {j/OK}.
2. Select Base Unit Setup, then press
{>}.
3. Enter 0000 (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select Call Options, then press {>}.
5. Select Call Restrict, then press {>}.
6. Set which handsets will be restricted by
pressing the desired handset number.
L All the registered handset numbers will be
displayed.
L Flashing numbers indicate call restriction
is turned ON for the corresponding
handset.
L To turn call restriction OFF for a handset,
press the number again. The number will
stop flashing.
7. Press {j/OK}.
8. Select a memory location, then press {>}.
L If the memory location already contains a
restricted number, the number is
displayed.
9. Enter the phone number or area code to be
restricted (up to 8 digits), then press
{j/OK}.
L To erase a restricted number, press
{C/T}.
10.Press {ih}.
FC235AL-PFQX2248ZA_en.book Page 79 Monday, June 20, 2005 2:19 PM