Panasonic KX-FLB881 Printer User Manual


 
14. General Information
88
14 General In formationPrinted Repor ts
14.1 Reference lists and reports
You can print out the following lists and reports for your
reference.
SETUP LIST
TEL NO. LIST
JOURNAL REPORT
BROADCAST LIST
PRINTER TEST
L If the test print has smudges, or blurred points or
lines, clean the inside of the unit (page 83). If
printing quality is still poor, replace the toner
cartridge and drum unit.
CALLER ID LIST
PCL FONT LIST
ADDRESS LIST
1 Press {MENU} repeatedly to display PRINT
REPORT.
2 Press {<} or {>} repeatedly to display the desired
item.
3 Press {SET} to start printing. i {MENU}
Specifications
14.2 Specifications
{SET}{<}{>}
{MENU}
Applicable lines:
Public Switched Telephone Network
Document size:
Max. 216 mm (8
1
/
2
") in width, Max. 600 mm (23
5
/
8
") in
length
Effective scanning width:
208 mm (8
3
/
16
")
Effective printing width:
Letter/Legal: 208 mm (8
3
/
16
")
A4: 202 mm (7
15
/
16
")
Transmission time
*1
:
Approx. 4 s/page (ECM-MMR Memory transmission)
*2
Scanning density:
Scanning resolution:
Up to 600 × 1,200 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
Copy resolution:
Up to 600 × 600 dpi
Fax resolution:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)-in standard
resolution,
7.7 lines/mm (196 lines/inch)-in fine/photo
resolution,
15.4 lines/mm (392 lines/inch)-in super fine
resolution
Photo resolution:
64-level
Scanner type:
Color Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR), Modified
Modified READ (MMR)
Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 /
19,200 / 16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800
/ 2,400 bps; Automatic Fallback
Operating environment:
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 70 % RH
(Relative Humidity)
Dimensions:
Approx. height 318 mm × width 440 mm × depth 445 mm
(12
1
/
2
" × 17
5
/
16
" × 17
1
/
2
")
Mass (Weight):
Approx. 16 kg (35.3 lb.)
Power consumption:
Standby: Approx. 7.5 W
Preheat: Approx. 65 W
Copy: Approx. 340 W
Maximum: Approx. 900 W (When the fuser lamp turns
on)
Power supply:
120 V AC, 60 Hz
FLB881-PFQX2732ZA-OI-en.book Page 88 Wednesday, July 18, 2007 11:22 PM