Panasonic KX-FLB881 Printer User Manual


 
14. General Information
89
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to change
without notice.
L The pictures and illustrations in these instructions
may vary slightly from the actual product.
L The accuracy of the clock is approximately ±60
seconds a month.
Recording paper specifications
Recording paper / Transparency / Label size:
Letter: 216 mm × 279 mm (8
1
/
2
" × 11")
Legal: 216 mm × 356 mm (8
1
/
2
" × 14")
A4: 210 mm × 297 mm (8
1
/
4
" × 11
11
/
16
")
Envelope size:
#10: 105 mm × 241 mm (4
1
/
8
" × 9
1
/
2
")
DL: 110 mm × 220 mm (4
5
/
16
" × 8
5
/
8
")
Recording paper weight:
60 g/m
2
to 90 g/m
2
(16 lb. to 24 lb.)
Note for recording paper:
L We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L Do not use the following types of paper:
Paper with cotton and/or fiber content that is over
20 %, such as letterhead paper or paper used for
resumes
Extremely smooth or shiny paper, or paper that is
highly textured
Coated, damaged or wrinkled paper
Paper with foreign objects attached, such as tabs
or staples
Paper which has dust, lint or oil stains
Paper that will melt, vaporize, discolor, scorch or
emit dangerous fumes near 200 °C (392 °F),
such as vellum paper. These materials may
transfer onto the fusing roller and cause damage.
Moist paper
Inkjet paper
L Some paper only accepts print on one side. Try using
the other side of the paper if you are not happy with
the print quality or if misfeeding occurs.
L For proper paper feeding and best print quality, we
recommend using long-grained paper.
L Do not use paper of different types or thickness at the
same time. This may cause paper jams.
L Avoid double-sided printing.
L Do not use paper printed from this unit for double-
sided printing with other copiers or printers. This may
cause paper jams.
L To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
Memory capacity
(for operation and storing memory):
32 MB
Fax memory capacity:
10 MB in total
Approx. 630 pages of memory reception
(max. 255 pages per one reception)
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 810 nm
Emission duration: Continuous
Print speed:
Letter: Approx. 22 ppm (pages per minute)
A4: Approx. 21 ppm (pages per minute)
Printing resolution:
600 × 600 dpi
*1 Transmission speed depends on the contents of the
pages, resolution, telephone line conditions and
capability of the other party’s machine.
*2 Transmission speed is based on the ITU-T No. 1 Test
Chart with original mode. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
FLB881-PFQX2732ZA-OI-en.book Page 89 Wednesday, July 18, 2007 11:22 PM