Filter
Top Products
4. Fax
35
4.6 Receiving a fax
automatically – Auto
answer ON
4.6.1 Activating FAX ONLY mode
1 Press {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
3 RINGS [±]
L The display will show the ring setting in
FAX ONLY mode.
L The {AUTO ANSWER} light is ON.
2 If you wish to change the ring setting, press
{A} or {B} repeatedly to display the desired
setting, and press {SET}.
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
If you have subscribed to a Distinctive
Ring service
See page 39.
4.7 Receiving a fax
manually – Auto answer
OFF
4.7.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L The {AUTO ANSWER} light is OFF.
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
CONNECTING...
3. Replace the handset.
L The unit will start fax reception.
L If you do not answer the call within 10
rings, the unit will temporarily switch to fax
reception. The other party can then send
a fax.
{SET}
{A}{B}
{FAX START}
{STOP}
FLM651-PFQX2292ZA-en.book Page 35 Monday, September 12, 2005 2:22 PM