Filter
Top Products
8. Programmable Features
56
Sending a fax at a specific
time
{#}{4}{1}{2}
This feature allows you to take advantage of low-cost calling hours
offered by your telephone company. This feature can be set up to 24
hours in advance of the desired time.
{0} “OFF” (default)
{1} “ON”
To send a document:
1. Insert the document into the auto document feeder.
2. If necessary, press {RESOLUTION} repeatedly to select the
desired resolution (page 30).
3. Press {MENU}.
4. Press {#}, then {4}{1}{2}.
5. Press {1} to select “ON”.
6. Press {SET}.
7. Enter the fax number.
L To enter an item using one-touch dial feature and navigator
directory, see step 4, “4.3 Sending a fax using one-touch dial
feature and navigator directory”, page 32. (When using
navigator directory, you do not have to press {<} or {>} before
pressing {A} or {B}.)
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “AM” or “PM”.
10.Press {SET}.
L To cancel after programming, press {STOP} then {SET}.
Setting the Error
Correction Mode (ECM)
{#}{4}{1}{3}
This feature is available when the sending/receiving fax machines are
ECM compatible.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): If there is an error during fax transmission /
reception, the fax machine will support the communication.
Setting the connecting
tone
{#}{4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
L If the ring back tone continues, the other party’s machine may not
be a fax machine or may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{4}{3}{0}
{0} “OFF” (default)
{1} “ON”
See page 39 for details.
Setting the ring pattern
for fax (Distinctive Ring
feature)
{#}{4}{3}{1}
{1} “A”
{2} “B”
{3} “C”
{4} “D”
{5} “B-D” (default)
See page 40 for details.
Feature/Code Selection
FLM651-PFQX2292ZA-en.book Page 56 Monday, September 12, 2005 2:22 PM