Filter
Top Products
8. Programmable Features
52
8 Progra mmable FeaturesFeatures Summary
8.1 Programming
1 Press {MENU}.
2 Press {#} and the 3-digit code (page 53 to
page 58).
3 Press the desired selection to display the
desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 Press {MENU} to exit.
To select features by using the navigator
key
You can select a feature by using the navigator
key instead of directly entering the program code
(# and a 3-digit number).
1. Press {MENU}.
2. Select the feature’s category you wish to
program.
Press {<} or {>} repeatedly to display the
desired feature’s category.
– “BASIC FEATURE”
– “ADVANCED FEATURE”
3. Press {SET}.
4. Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5. Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
6. Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7. To exit programming, press {MENU}.
Note:
L To exit programming, press {MENU} at any
time.
{SET}
{<}{>}{A}{B}
{MENU}
FLM651-PFQX2292ZA-en.book Page 52 Monday, September 12, 2005 2:22 PM