Filter
Top Products
8. Programmable Features
53
8.2 Basic features
Feature/Code Selection
Setting the quick setup
{#}{1}{0}{0}
You can print out the quick fax setup guide and select the desired
receiving mode depending on your situation.
{1} “FAX ONLY” (default): Use only as a fax (page 35).
{2} “DIST. RING”: With the Distinctive Ring service (page 39).
{3} “EXT. TAM”: With an external telephone answering machine
(page 36).
{4} “TEL ONLY”: Mostly phone calls (page 35).
1. Press {MENU}.
2. Press {#}, then {1}{0}{0}.
3. Press {SET}.
4. Press {SET} again to print the quick fax setup guide.
L If you do not wish to print it, press {STOP}.
5. Press {1} to {4} to display the desired setting.
6. Press {SET}.
7. Press {MENU}.
Setting the date and time
{#}{1}{0}{1}
Enter the date and time using the dial keypad. See page 21 for details.
Setting your logo
{#}{1}{0}{2}
Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
{#}{1}{0}{3}
Enter your fax number using the dial keypad. See page 24 for details.
Setting the dialing mode
{#}{1}{2}{0}
See page 20 for details.
Setting flash time
{#}{1}{2}{1}
The flash time depends on your telephone exchange or host PBX.
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “110ms”
{7} “100ms”
{8} “90ms”
Note:
L If the fax machine is connected via a PBX, PBX functions
(transferring a call, etc.) might not work correctly. Consult your PBX
supplier for the correct setting.
Changing the LCD
display contrast
{#}{1}{4}{5}
{1} “NORMAL” (default): For normal contrast.
{2} “DARKER”: Used when the display contrast is too light.
Setting the ringer pattern
{#}{1}{6}{1}
{1} “A” (default)
{2} “B”
{3} “C”
FLM651-PFQX2292ZA-en.book Page 53 Monday, September 12, 2005 2:22 PM