Filter
Top Products
101
Remote Operation
Answering
Device
Re-recording a greeting message
You can change the contents of the greeting message for the TAD/FAX mode.
1. Press to start recording.
● A long beep will sound.
2. Speak clearly up to 16 seconds.
● If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from step 1 within
10 seconds.
3. When finished, press .
● The new greeting message will be played.
9
7
Turning the message transfer/pager call on or off
You must pre-program a transfer telephone number or a pager number (see page 104) before using this
feature.
Press to turn ON the message transfer/pager
call.
Press to turn OFF the message transfer/pager
call.
—If a transfer telephone number or a pager number is
not programmed, you cannot turn this feature ON.
The voice guide will prompt you.
8 2
8 1
Message transfer is set.
Transfer phone number is 123456789.
or
Pager call is set.
Pager number is 098765432.
Voice guide example:
Message transfer is off.
or
Pager call is off.
Transfer phone number is not set.
or
Pager number is not set.
Skipping the greeting message
Press during the greeting message playback.
—The unit will skip the rest of the greeting message.
0
Changing to the TEL mode
You can change the setting of the receive mode from TAD/FAX to TEL from a remote location.
1. Call your unit.
2. Enter your remote operation ID.
3. Press .
8 0